Laparoscopic surgery, sometimes called minimally invasive surgery (MIS), involves the insertion of a video camera and a variety of long thin surgical instruments through small "keyhole" incisions less than an inch in size. Although this technique was developed over 100 years ago, it did not gain widespread use until after the 1950's and has grown in popularity and acceptance since then. First used in only the most simple of abdominal and pelvic procedures, the complexity and variety of surgeries now performed laparoscopically have greatly expanded in recent years.
Although laparoscopic surgery has most of the same risks as traditional open surgery including possible hemorrhage or adverse reactions to anesthesia, there are many advantages that have made laparoscopic surgery popular. These benefits include reduced post-operative pain, more rapid recovery, shorter hospitalization, smaller scars and a quicker return to normal activities.
Regretfully, there are also additional risks associated with laparoscopic surgery and these risks often lie at the heart of any litigation involved. Before we discuss the risks of laparoscopic surgery, it is important to understand some of the specifics of how these surgeries are performed. At the beginning of a laparoscopic surgery, a special needle (Veress needle) is inserted into the abdomen allowing the abdominal cavity to be filled (insufflated) with CO2 gas. This creates a gas filled space in which the surgical instruments can operate. Next, after small incisions are created in the skin, sharp metal cylinders (trocars) are punched through the abdominal wall to create portals through which the laparoscope and laparoscopic instruments can be inserted. The risks associated with laparoscopic surgery that I encounter regularly are primarily associated with these initial Veress needle and trocar insertions, as well as a few other technical limitations of the laparoscopic technique.
The insertion of the Veress needle and the trocars are a risk because these sharp metal instruments are inserted blindly into the abdominal cavity. If proper procedures are followed, they are inserted into areas least likely to cause injury in a normal person, but accidents happen and procedures are not always followed, therefore these instruments can result in serious injury. Perforations of the small bowel, colon, stomach, liver or spleen can occur. Also, major arteries and veins are at risk including the aorta, inferior vena cava and iliac vessels. Perforation injuries are among the most common injuries unique to laparoscopic surgery. Certain technical limitations also contribute to the risks of laparoscopic surgery. While traditional open incisions offer a more complete exposure and control of the surgical area, open procedures also allow the surgeon to feel the structures being manipulated. Laparoscopic surgery offers only a limited view of the operative field and none of the tactile sensation of traditional surgery. The view through the laparoscope prevents normal depth perception and provides only a view of a limited portion of the abdomen where the camera happens to be aimed at any given time. These limitations can lead to increased risks of intra-operative injury, but also can lead to a failure to recognize injuries when they occur. Whether it is a bile duct injury during laparoscopic cholecystectomy, a bowel perforation during laparoscopic hysterectomy or a vascular injury during laparoscopic sterilization, we are most often called upon to illustrate the consequences of the surgeon's failure to recognize and timely repair the damages that occur. These consequences can include peritonitis, sepsis, hemorrhage and even death and the argument is often made that the original damages would most likely have been recognized had the procedure been performed through a traditional open exposure.
Arterial aneurysm and arterial dissection are two completely different conditions but both are commonly seen in medical malpractice litigation. Since an understanding of both conditions requires an overview of the circulatory system and the layers of the arterial wall, I thought it would be convenient to combine them together for today's topic.
The arteries are the blood vessels that carry blood away from the heart to the various regions of the body, unlike the veins through which blood flows back from the body to the heart. Because the blood flowing through the arteries from the heart is under pressure created by each heartbeat, the arteries are much thicker and more muscular than the veins and are able to constrict and relax when necessary to adjust the blood pressure within the body.
The layers of the wall of the arteries consist of a tough outer layer, a muscular middle layer and a thin smooth inner layer. This inner layer, the intima, plays an important role in cases of arterial dissection that we will discuss in a moment. Also, it is important to know that throughout the layers of the artery wall there is elastic connective tissue that helps the artery to resist the internal pressure and maintain its shape.
First let's discuss arterial aneurysms. An aneurysm is a weakening in the wall of an artery that allows it to bulge outward like a balloon. This weakness and loss of elasticity can be caused by a variety of factors including injury, disease, congenital malformation or prolonged increases in blood pressure. These bulging arteries can occur almost anywhere in the body but are most common in the aorta, which is the main artery that originates in the heart and courses down through the chest and abdomen, and the cerebral arteries in the head and brain. Aneurysms themselves rarely have symptoms or cause complications although large aneurysms of the cerebral arteries can cause increased pressure within the skull resulting in headaches and other neurological complaints. But aneurysms are time bombs waiting to go off. Aneurysms can rupture or burst, leading to massive hemorrhage that can result in stroke or sudden death.
Litigation regarding aneurysms usually revolves around issues of diagnosis and treatment. It is important for an aneurysm to be diagnosed prior to rupture while treatment is possible. Diagnosis can be accomplished with various radiological studies including angiograms, CT scans or MRI. Treatment usually involves surgery either by exposing and repairing the aneurysm through an open incision or by repairing it internally via catheters advanced up through the arteries (see the animation at the top of this entry). Either way, the goal is to reinforce and strengthen the wall of the vessel and to prevent a subsequent rupture.
Arterial dissections also develop from a defect in the vessel wall. A dissection begins with a tear of the intima, inner layer, of the artery. Initially, this tear may be quite small, but over time the force of blood flow over the defect causes the torn edge to lift up and detach from the underlying layer. Over time a flap forms as the dissection continues allowing more and more of the blood to flow beneath the flap and into the space between the layers of the vessel creating a blind channel leading nowhere. Eventually the flap can become so large that normal blood flow through the vessel is blocked as the blood is channeled down beneath the intima.
Also, clotting agents within the blood will recognize the tear in the intima and accumulate at the site of injury creating a clot that can also expand causing a blockage of the vessel. Either way the resulting problem with a dissection is a severe slowing or complete blockage of blood flow that deprives the tissues and organs downstream of their normal blood supply. A dissection of a carotid artery in the neck, for example, can deprive the brain of adequate blood flow resulting in a sudden stroke, permanent brain injury or even death.
Arterial dissection can be caused by trauma including stretching of the vessel from acceleration and deceleration forces, by trauma caused during surgery by retractors or intravascular catheters, by injections or I.V. placements or by disease processes within the vasculature. Diagnosis is usually made when ischemia, or lack of blood flow, is recognized in the region supplied by the damaged vessel. Early diagnosis can permit surgical repair of the damaged vessel either by direct repair or surgical bypass.
They say that things happen in clusters. I may not be superstitious or have much faith in coincidence, but I have been amazed by the number of cases I’ve seen lately involving colon polyps and colon cancer. Unlike disc herniations or brain injuries, this is not a topic we see every day, but I have certainly seen a rise in the popularity of this topic among the attorneys who call me seeking advice for medical demonstrative evidence.
As with the litigation of almost all cancer cases, colon cancer cases primarily involve issues of failure to diagnose or failure to adequately treat. More often than not, the issues revolve around the treatment, or lack there of, of colon polyps. Therefore, I offer this brief overview.
The colon, or large intestine, is the final portion of the digestive system leading ultimately to the rectum and anus. The colon is divided into segments called the cecum, ascending colon, transverse colon, descending colon and sigmoid colon. It is like a large flexible tube and normally the inner wall of the colon is smooth. For unknown reasons, some people, later in life, develop small growths on the inner wall of the colon. These growths are called polyps.
Colon polyps are not cancer, but some polyps can become cancer over time, In fact, some references state that almost all colon cancers originally begin as polyps. For this reason, it is essential for the healthcare provider to recognize, biopsy or remove polyps before colon cancer can develop.
Diagnosis of polyps can sometimes be accomplished with a barium enema, but most often the physician will perform a colonoscopy or sigmoidoscopy. A colonoscopy involves the insertion of a flexible scope through the anus that is advanced all the way around through all aspects of the colon. A sigmoidoscopy, while not as invasive as a colonoscopy, only allows the distal portions of the colon to be viewed.
With the colonoscope, a doctor is also able to completely remove or biopsy a polyp, taking a small portion for identification under a microscope. Identification is important because there are different types of polyps. Adenomatous polyps or adenoma are the most common type of polyp, but there are various types of adenomas each with a different risk of becoming cancer. Villous adenomas, while only accounting for about 15% of all polyps, carry the highest risk of becoming cancer and when diagnosed should always be removed.
In short, if a person is over 50, has a family history of polyps or colon cancer, or has other risk factors for colon cancer, they should be examined regularly to check for the presence of polyps in the colon. If polyps are found, they should be removed or followed closely by the physician to avoid the possible development of colon cancer.
Carpal tunnel syndrome is one of the most common and familiar medical conditions seen in personal injury litigation. Almost everyone's heard of this condition and probably knows someone who has experienced it, but over the years I've realized how poorly it is actually understood. In this article I will provide a basic appreciation of the anatomy involved in this pervasive condition, as well as an overview of the surgical procedure that often prove necessary for treatment.
First, we must recognize that the carpal tunnel really is a tunnel. It is a passageway on the palmar side of the wrist, right beneath the wrist crease where the wrist bends on the end of the arm, where the tendons the bend the fingers pass from the arm down into the hand. This tunnel is bordered by the bones of the wrist (carpal bones) on the bottom and the flexor retinaculum (transverse carpal ligament) on the top and the tendons pass through this tunnel moving back and forth as they pull and release the fingers facilitating the normal actions of the hand. Of importance we note that, along with these tendons, the median nerve also passes through the carpal tunnel. The median nerve is a major nerve that branches off of the brachial plexus in the shoulder region and courses all the way down the arm, passing through the carpal tunnel into the hand. The median nerve is responsible for innervating much of the hand including the thumb, index finger, middle finger and the inner half of the ring finger. Under normal circumstances, the median nerve is unaffected by the frequent movement of the various flexor tendons around it within the carpal tunnel.
Carpal tunnel syndrome is an assortment of symptoms resulting from compression of the median nerve within the carpal tunnel. This can involve pain, numbness, tingling and weakness of the hand or extending up the arm toward the elbow. This compression of the median nerve occurs when other structures in the carpal tunnel region (tendons, bones, flexor retinaculum or synovial linings) become inflamed and swollen and push against the other structures overfilling the space within this tunnel. This inflammation can result after injury such as strain of the tendons or fracture of the bones, or as a result of the stress caused by repetitive motions such as typing, using hand tools, playing sports or playing a musical instrument, etc. There are also certain diseases such as arthritis, diabetes, acromegaly and hypothyroidism can contribute to carpal tunnel syndrome, but these factors are not as commonly seen in litigation. Carpal tunnel syndrome is often treated with immobilization for a few weeks with a splint or brace. Anti-inflammatory medications, such as ibuprofen, are also helpful and sometimes corticosteroid injections may be administered. But in some cases, these conservative treatments are not successful and surgery is necessary to decompress the median nerve. This surgery is called carpal tunnel release or median nerve decompression and it involves the complete transection (division) of the flexor retinaculum that forms the roof of the carpal tunnel. This surgery may be performed through an open incision or done arthroscopically with a scope and instruments inserted through much smaller incisions.
In personal injury litigation, orthopedics cases are generally the most straightforward. Unless there is a complex joint injury or a pre-existing condition, most laymen are going to be able to understand your average fracture case. Presentation of the injuries is usually quite straightforward as well, primarily because most orthopedics cases will have clear-cut radiological evidence: X-rays, CTs or MRIs. With such a straightforward topic and such abundant evidence and documentation, the demonstrative evidence solutions available are almost endless. The final option selected often depends on your personal preferences, presentation style, strategic priorities and budget. It comes down to, “How far do you want to take it?”
In this article I will discuss many of the various presentation options you have available to you in an orthopedics case ranging from the most simple to the most complex. I will provide the pro’s and con’s of each approach and try to provide some general ballpark figures for costs. I will also provide links to various examples so that you can better understand each option. Hopefully this will help you to decide which approach best meets your individual expectations when it is time for you to shop around for your demonstrative evidence solution.
If you’re in luck, you may have good film evidence that clearly shows the fractures in you case. X-rays can be printed and enlarged at a variety of facilities and can often prove to be adequate and inexpensive demonstrative evidence. This works best with long bone fractures in which the fracture is clear and unmistakable. It is not as effective if the fracture is small or in a complex region such as a joint or in the skull since those fractures are more difficult to identify on films. The upsides to simple enlargements include the price that will usually be around $200 and the ease of admissibility. The downsides include lack of drama with static black and white films and the intimidation factor that some laymen may feel when asked to review even the simplest radiological study.
A step above simple film prints is a radiological colorization. This is a process in which your illustrator will create a digital copy of your X-ray, CT or MRI and add simple flat color to the various structures and possibly more detail in the area of the actual injury. While this type of exhibit does not have the detail and clarity of a fully rendered medical illustration, it makes the film more accessible, understandable and dramatic while keeping costs down and retaining the authority of the actual film evidence. Simple colorizations can be acquired in the $300 to $600 range.
Next, in the level of complexity is what I refer to as a radiological film interpretation and is another product option based specifically on the film evidence. Unlike a colorization where simple flat color is added, interpretations provide a fully rendered illustration of the skeletal anatomy based on a precise tracing of the actual film evidence. This type of process gives the image more texture and three-dimensional appearance allowing even the smallest fragments and details to be shown. Since this type of image is more realistic in appearance, it will often be more dramatic as well. The costs for this type of presentation could range from $700 to $900.
Of course anatomical models continue to be a popular option for demonstrative evidence and there is a certain appeal to carrying a physical model into court that one can touch and pass around. The downside is that models most commonly are only available to demonstrate normal anatomy. While it is possible to acquire a custom model showing the actual injury, this custom process is often quite expensive. An alternative is to start with a normal anatomy model or skeleton and have your expert draw on the site or sites of fracture with a marker. While this would certainly help you to identify the sites of the injuries, it does not offer the drama that a depiction of the actual injury would provide. Anatomical models range widely in price, but even a full skeleton can be bought for as little as $300.
The most popular option for medical demonstrative evidence is still traditional medical illustrations. These are images created by a skilled illustrator based specifically on your case information. While these exhibits could certainly incorporate the film evidence, the illustrator is not tied to these films as the only source of information. Therefore, unique views are possible that may not be seen in any one film to best demonstrate the injuries in a clear and dramatic fashion. Surgeries may also be incorporated into medical illustrations. An experienced medical illustrator can interpret the narrative report from a written operative note and provide a step-by-step depiction of the key steps of this procedure. Another popular illustration format is to provide a “progression of condition” showing the same area of anatomy over time. This can allow you to compare normal anatomy, the post-accident injury, the post-operative condition and later complications. Flexibility is the primary attribute for this type of exhibits since almost any conceivable issue can be portrayed. Prices can range from $800 to over $2000 depending on your provider and the complexity of the information. The most dramatic type of presentation available is custom animation. Today’s technology allows for almost any structure to be modeled electronically in 3D so that your medical animator can show the anatomy, the injury or even the surgical procedure in a fully custom motion picture presentation. These animations present the information in an understandable and accessible way that appeals greatly to the younger generation that has come to expect such media. Animations are especially effective in cases that involve motion allowing you to show how injuries occur, how they affect bodily function or how they are repaired. The downsides are primarily the time and cost involved. Since the animation process is so much more involved, you should anticipate approximately 300 to 400% more time for production with a comparable increase in cost.
The final option we should cover is interactive electronic presentations. The may range from simple PowerPoint presentations combining a few pictures and text pages to fully custom professionally designed programs incorporating animations, video, photographs, illustrations and all kinds of supporting documentation. These types of presentations are growing in popularity as more and more in the legal market become comfortable with the technology required. The primary benefit of electronic presentation is the organizational advantages when all your demonstrative evidence is combined and accessible through your laptop. No longer do you have to carry multiple charts and graphs into the courtroom and constantly put up and take down items from the easel as you move from topic to topic. Disadvantages include the technology and equipment required for display and the possible limitations of your presentation environment. In other words, you will need to have a solution for projecting or displaying the presentation and you will need to become comfortable with the technology required, and you will need to give consideration as to the facility where you will be presenting and determine if any equipment will be available to you and if the light levels will allow for the proper viewing on your projection screen or monitor. Prices vary widely depending on the amount and complexity of your information.
So, as you have seen, even the most simplistic orthopedic case can leave you with a complex set of decisions to make when you begin to plan your presentation. You can stick with the basic traditional approaches or may decide to add dramatic impact by trying more modern technology solutions. Of course price is always and issue, so it is good to determine in advance what your budget will allow. At the end of the day, it all boils down to a question of “how far do you want to take it?”
The large majority of heart attack cases that we see litigated involve a failure to diagnose developing coronary artery disease and, to a lesser extent, the failure to treat it. To help provide a better understanding of these issues I’ll provide an overview of heart attacks and coronary artery disease, the reasons for and risks of misdiagnosis, and the most common types of treatment that are available when a timely diagnosis is made.
Even though blood is pumping constantly through the internal chambers of the heart, separate vessels called coronary arteries run along the surface of the heart and supply the blood to the actual muscles that make up this vital organ. A constant flow of oxygenated blood through these coronary arteries is essential if the heart is to continue working properly. If blood flow through one or more of these vessels is significantly slowed or blocked completely the heart muscle will struggle and eventually die, a condition called myocardial infarction (localized heart muscle death). This blockage of blood flow is most commonly caused by coronary artery disease, although other events such as emboli (blood clots) vegetative growths or even trauma can block these vessels. Coronary artery disease is a condition in which plaque (plak) builds up inside the coronary arteries. Plaque is made up of fat, cholesterol (ko-LES-ter-ol), calcium, and other substances found in the blood. When plaque builds up in the arteries, the condition is called atherosclerosis (ATH-er-o-skler-O-sis). This is generally a prolonged process that develops over time causing angina (an-JI-nuh) prior to a heart attack. Angina is chest pain or discomfort that occurs when not enough oxygen-rich blood is flowing to an area of heart muscle. Angina may feel like pressure or squeezing in the chest, or may occur in the shoulders, arms, neck, jaw, or back.
Because the formation of coronary artery disease is prolonged and is often heralded by angina pain, litigation often arises when a patient seeks treatment for typical pain complaints but is misdiagnosed when possible links to heart disease are overlooked. Pain is a common complaint and a treating physician may initially suspect that the symptoms are linked to muscle soreness or joint strain in the affected regions including the shoulder and spine. In such cases, specific tests for heart problems may not even be considered much less performed by the physician. This delay may prove disastrous if the blockages of the coronary arteries worsen and lead ultimately to a myocardial infarction.
If detected in time, there are several alternatives for the treatment of coronary artery disease. First, medication may be considered. These medications could include blood thinners to help the blood pass more freely through an area of partial blockage, or clot-buster medications to prevent or break up blood clots that may be contributing to the blockage of blood flow. Blood pressure and cholesterol control medications may also be given to provide more long-term treatment of coronary artery disease.
In addition to medications, there are a variety of surgical options that are also available for the treatment of coronary blockage. These consist mainly of angioplasty and surgical coronary artery bypass. Angioplasty is the treatment of an arterial blockage from the inside of the vessel. A catheter is inserted into an artery in the groin and advanced up through the aorta to gain access to the root of the coronary arteries. Through this catheter an inflatable balloon can be inserted into the area of blockage and expanded to push open a larger channel for the blood to flow. A stent (wire mesh tube) may also be placed into this site to hold the vessel open permanently. Coronary artery bypass involves the placement of a graft from above the site of blockage to below the site to allow blood flow to detour around the blockage. These grafts may be synthetic tubes or vessels harvested from the patients chest or leg. The mammary artery from the chest wall or the greater saphenous vein from the leg are both commonly used for this purpose.
There was a time when gallbladder and cholecystectomy issues were the most common medical malpractice cases that we saw. In recent years, complications of gastric bypass surgery may have become even more common in medical malpractice. The rise of the number of these cases being litigated is probably due to a number of factors and is open to debate, so I won't go into that nest of hornets. But I have seen a common need for a general orientation to the anatomy and surgical techniques involved, so that is the topic of this piece.
First, lets cover the purpose of gastric bypass. For those obese patients who find it impossible to lose weight through traditional diet and exercise programs, gastric bypass surgery can be effective. This surgery involves a dramatic reduction in the size of the stomach reducing the amount of food that can be consumed in any one meal and therefore imposing caloric intake restrictions on the patient after surgery.
To understand the surgery, you must first understand the basics of the anatomy involved. Food that is swallowed flows down through a muscular tube called the esophagus that extends from the throat down through the posterior chest, behind the heart, and into the upper abdomen where it empties into the stomach. After being substantially broken down by the gastric juices, the bolus of food then leaves the stomach and moves into the small intestine, another muscular tube that leads to the colon. It is also important to know that bile from the liver and pancreatic juices from the pancreas, which both affect digestion, also empty into the first segment of the small intestine just past the stomach.
In a gastric bypass the stomach is divided so that only a small portion of the upper part of the stomach is left attached to the esophagus. Although food can still get into this small pouch through the esophagus, it cannot get out, so a way must be devised to allow the food to exit. To accomplish this, the small intestine is divided a few feet below the stomach and the distal (furthest away) segment is pulled up and attached to the bottom of the stomach pouch. This connection of the small intestine to the newly created stomach pouch reestablishes the flow through the digestive system, but what of the gastric juices in the lower part of the stomach and the bile and pancreatic juices that enter into the proximal small intestine? They still need a route to escape and join with the digestive contents. Therefore the small segment of the small intestine above the loop that has been pulled up to the stomach is attached to the side of this loop so that the digestive juices in the proximal segment can join with the flow well below the stomach. When you look at this new architecture of the small bowel, it appears to form a Y, thus the name "Roux-en-Y".
Finally, let's look at the language a bit more closely. Most laymen are put off by the excessively medical sounding title "Roux-en-Y anastomosis". Don't let the name scare you. First, what is an anastomosis? It's simple. Just know that an anastomosis is a connection between two tubular structures. This could be a connection between two blood vessels, two bile ducts or in this case, two segments of bowel. So what about Roux-en-Y? Don't let the name of the famous Swiss surgeon throw you off. A Roux-en-Y anastomosis is any connection of any two segments of bowel in a Y-shaped pattern, so the "Y" part of the name is what is important for you to remember. So long as you understand that this procedure involves a transection of the bowel, connection of the distal segment to the stomach and connection of the proximal segment of the bowel lower down on the distal segment, it will be clear to you. See the animation at the top of the article and you will see that this is a rather straightforward concept.
